Get In Touch With Us
×
Request Price

ASE HSP/DM

Many screed, plaster and structural mortars are hard to be pumped due to their compositions and chemical additives. Higher pumping pressures should be applied on them for continuous uses.
For constant pressures equal to and over 40 bars, mechanically driven cylinder pumps or screw pumps are not suitable. This is just the work for a double piston pump driven by a hydraulic power unit that is the ASE HSP.
In ASE HSP models, thanks to their hydraulic power unit advantage, it is possible to change the pumping capacity and the pressure setting according to the application requirement. The ASE HSP is operated by minimum abrasion component cost compared to screw pumps.

HSP / DM is a model with diesel engine and lifting mixer. In addition, it is offered to our users with a towing unit with a highway permit, automatic lubrication and high pressure washing system.

Technical Details

  • Output capacity*    10-150 l/min
  • Pumping pressure*    60 bar
  • Working pressure*    40 bar
  • Maximum aggregate    8-10 mm
  • Conveying distance*    200 m
  • Conveying height*    60 m
  • Power supply    Diesel, 4 cylinders
  • Fuse protection    -
  • Drive motor    26,2 kW, 3000 rpm
  • Mixer content    180 l
  • Compressor    400 l/min, 8 bar
  • Vibrator    12 V, 205 kg
  • Sieve with vibrator    10 mm
  • Remote control    Pneumatic + cable
  • Output coupling    2”
  • Chassis    Torsion axle braked
  • Material hose    Ø 50+35 mm
  • Dimensions (L/W/H)    2900/1860/1630 mm
  • Loading height    940 mm - 1600 kg

Area of Application

  • Conventional plaster
  •  Screed mortars
  •  Lightweight concrete
  •  Fibre concrete
  •  Special plasters


  • Stucco siding
  •  Binding plasters
  •  Masonry mortar
  •  Flooring
  •  Insulating plasters
  •  Injection mortars
  • Spraying mortars
  •  Fillers and bonding mortars
  •  Reinforcing and adhesive
  • mortars
  • … and many more

Standard Equipment

  •  Mortar hose Ø 50 mm 40 bar 20 m with  couplings
  •  Mortar hose Ø 50 mm 40 bar 10 m with  couplings
  •  Mortar hose Ø 35 mm 40 bar 10 m with  swivelling coupling
  •  Reduction coupling 50/35 mm
  •  Air hose Ø 10 mm 41 m with GEKA  couplings
  •  Integrated pressure manometer 0-60 bar
  •  Spray gun Ø 35 mm, nozzle 18 mm
  •  Air compressor 400 l/min 8 bar
  •  Power cable 5x4 mm², 25 m CEE cpl. 32 A (EM)
  •  Cleaning sponge ball Ø 60 mm, 2 pcs
  •  Cleaning sponge ball Ø 45 mm, 2 pcs
  • Hose cleaning apparatus via air
  •  Manual grease pump
  •  Remote control cable 50 m
  •  Round file
  •  Tool box