Get In Touch With Us
×
Request Price

ASE HSP/EM


Many screed, plaster and structural mortars are hard to be pumped due to their compositions and chemical additives. Higher pumping pressures should be applied on them for continuous uses.

For constant pressures equal to and over 40 bars, mechanically driven cylinder pumps or screw pumps are not suitable. This is just the work for a double piston pump driven by a hydraulic power unit that is the ASE HSP. In ASE HSP models, thanks to their hydraulic power unit advantage, it is possible to change the pumping capacity and the pressure setting according to the application requirement.

The ASE HSP is operated by minimum abrasion component cost compared to screw pumps. In ASE HSP models, thanks to their hydraulic power unit advantage, it is possible to change the pumping capacity and the pressure setting according to the application requirement. The ASE HSP is operated by minimum abrasion component cost compared to screw pumps.

HSP/EM is electric pumps and pumps with a lifting mixer.                        

Technical Details

  • Output capacity:*10-150 l/min
  • Pumping pressure:*60 bar
  • Working pressure:*40 bar
  • Maximum aggregate:8-10 mm
  • Conveying distance:*200 m
  • Conveying height:*60 m
  • Power supply:400 V, 50 Hz
  • Drive motor:15,0 kW
  • Mortar piston diameter:100 mm
  • Stroke length:300 mm
  • Mixer content:220 l
  • Vibrator:0,17 kW, 205 kg
  • Sieve with vibrator:8 mm
  • Power cable:5x4 mm2
  • Remote control:Pneumatic + cable
  • Output coupling:2”
  • Suction connection:4”
  • Material hose:Ø 50+35 mm
  • Compressor:350 l/min, 8 bar
  • screed application:Ø 50 mm
  • For spray application:Ø 35 mm
  • Dimensions (L/W/H):3950/1860/1600 mm
  • Loading height:970 mm
  • Total weight approx.:1620 kg
  • * Depending on piston speed, mortar quality, composition and consistency, diameter of the conveying hose, conveying height.

Standard Equipment

  • Mortar hose Ø 50 mm 20 m with couplings
  • Mortar hose Ø 50 mm 10 m with couplings
  • Mortar hose Ø 35 mm 10 m with couplings
  • Air hose Ø 10 mm 41 m with GEKA couplings
  • Reducing coupling 50/35 mm
  • Integrated pressure manometer 0-100 bar
  • Spray gun Ø 35 mm, nozzle 18 mm
  • Air compressor 350 l/min 8 bar
  • Power cable 5x4 mm2, 25 m CEE cpl. 32 A
  • Cleaning sponge ball Ø 60 mm
  • Cleaning sponge ball Ø 50 mm
  • Round file
  • Shifting spanner
  • 6/125 screwdriver